This is the meat and potatoes of it....

Performance raised from 233 to 285 hp and 550 Newton metres
Wide body contributes to the SUV's assertive road presence
22-inch SUV-Select light alloy wheels in graphite silver
All components with TÜV Certificate
With its wide-body construction and increase in performance of more than 20 per cent, JE DESIGN transforms the Q7 into an SUV with enormous road presence and increased overtaking power. The 22-inch-wheels and the double exhausts emphasise this impression even more.

And let's get a little deeper into it.

To start with the 3.0-litre standard diesel version produces 233 hp (171 kW). By optimising the engine control unit, JE DESIGN raises this figure to 285 hp (210 kW). As a result the maximum torque from the compression-ignition engine increases from 500 to 550 Newton metres and the top speed from 210 to 219 kph. The 2.3-tonne vehicle reaches the 100-kph mark in a mere 8.4 seconds instead of the 9.1 seconds needed by the standard version.

The vehicle's assertive road presence is achieved by the wide body design. Using it, JE DESIGN makes the Ingolstadt vehicle take on an enormous width and gives the SUV an aggressive presence. The transformation covers the front spoiler corners which JE DESIGN offers for the Q7 S-Line in pairs, with and without the wide body kit (690 Euro, ), the twelve-part flared wheel arch kit including the door trim (2699 Euro), and the rear bumper extension with lozenge-shaped double exhaust outlets on both sides (1798 Euro). The forbidding look facing forward is achieved by the headlight covers (99 Euro). At the rear the spoiler tail unit, which in addition covers the C-pillars (1099 Euro), ensures the required down-force and puts the finishing touch to the uncompromising exterior.



The entire JE DESIGN Wide Body kit is not reserved only for the S-Line models. The engineers at JE DESIGN have developed the wide construction so that it fits on all Q7 models regardless of year of manufacture and the Facelift Model (apart from the W12 TDI).

The electronic lowering (1428 Euro) on the one hand improves the JE DESIGN Q7's sporty appearance and at the same time heightens the SUV's passion for bends. At 35 millimetres nearer to ground level, the powerful vehicle definitely provides a livelier ride round bends and obstacles.



As is to be expected, JE DESIGN supplies all components with the appropriate TÜV Certificate to ensure registration in the vehicle's documents without further ado.

For more details about JE Design, check out www.je-design.de